Видео

Hi , what NVR do you have it connected too. I can't get the auto tracking to work.

THANK YOU!!! I've been trying to remember my password for 3 days. This was so helpful!

Can you send the software version? When i activate the tracking the camera doesn’t track very well they lose the human, the pan tilt adjust in advance the object maybe its a software issue

Muy buen video gracias porque aprendí del defecto de la lavadora eres muy bueno

Looks like someone hacked away your underbody shield. After you've added the new oil, run the engine for a few minutes, let it settle, then check the oil level again.

September 2024... I found mine stashed with some boxes. I thought I'd lost it after moving. Sadly it seems the battery is dead as it won't charge. I guess it's time to donate it to a museum xD The 60 second trick worked though.

Hy every one i have kia Rio 2014 automatic Which starter i must buy and how many teeth on the starter please help

My gener8 technology by android doesn't take you to the boot screen when you do that any advice

Can anyone recommend where to get new rotors and brake pads?

You could probably get over 60 FPS, because VSync is probably on.

I feel like I can do it after watching this video

I need to replace my plastic door handle. Do you have a video on that? Thanks. Good explanation on your part.

so you tapped into the Car Stereo Dimmer Wire?

Can anyone tell me how to where the window sits? Mine is broke and am trying to replace

Good example, except for one error; don't allow the fill bottom to empty. If all of the brake fluid empties out of the reservoir, air can get into the system and cause serious issues. Otherwise great video.

If your not a tech you should look into it, you have the qualities. Even if you did it part time. Nice Job, you saved yourself $275. 🤜🤛

God bless you brother!

Don’t listen to this guy

great job dude! very helpful!

Can it pump up like that? Doesn’t half of it just drain right back in?

hey quick question please. is there a way to connect that wire to the wiring harness instead of the factory wire?

Amazing video thanks for the walk through. It worked!

Nice job

2024 anybody

Curious if this actually worked

I’m having a problem where when I program a button it presses it non stop so it either goes all the way down or all the way up does anyone have a fix for this?

who can fix my 😮😮tablet charging port its a adroid tablet

i need mine to be fix

PO128 could be the coolant temperature sensor switch to the radiator fan. Turn on air conditioning and see if the fan turns on. If so, turn off air and let engine heat up past 200. If radiator fan doesn't come on it's the temperature sensor switch. If the engine never heats up much, the thermostat is stuck open. If it heats up and keeps going up, even after the engine fan comes on, the thermostat is stuck closed. All to be done with the air conditioning off.

the newer cars have codes which wires are ruined but many mechanics replace whole package costing $1500-6500 per occurrence. mom n pop car mechanics might be best. squirrel here not deterred by tobasco or peppermint or garlic. help! toyotas encase wires with environment friendly soy covering! a delicious food to rodents. you are a wonderful person not blaming the squirrel wanting to help them. its said mother squirrels always have another back up nest. i dont understand how babies would have survived running engine gets 200 degrees. i ordered a battery operated signal senser you attach to battery that deters them. we will see

the newer cars have codes which wires are ruined but many mechanics replace whole package costing $1500-6500 per occurrence. mom n pop car mechanics might be best. squirrel here not deterred by tobasco or peppermint or garlic. help! toyotas encase wires with environment friendly soy covering! a delicious food to rodents. you are a wonderful person not blaming the squirrel wanting to help them. its said mother squirrels always have another back up nest. i dont understand how babies would have survived running engine gets 200 degrees

Great....

1LC1 is usually because the softener dispenser is clogged and overflowing due to the stupid little disc in the line that gets plugged with softener. The water overflows and hits the leak sensor at the bottom of the unit. Quickest fix I've seen is steaming it through the dispenser. I'd open the line and remove the disc or it will happen again. All the disc is used for is to more evenly distribute the softener. Unnecessary! Or better yet, don't use softener at all. It's not good for the machine even though it's supposedly designed to use it. It's also not good for your fabrics or your skin. It is wax based chemicals and coats and gums up everything causing machine sensors to eventually malfunction and towels to be less absorbent, etc. Use a 1/4 to 1/2 cup of 5% normal household distilled white vinegar instead. You'll be amazed at the results and save all kinds of money on the softener itself, as vinegar is way cheaper. Also will save money in the long run on machine maintenance and new fabrics. This goes for Dryer sheets too. Although they are not as intrusive as the liquid softener. Great video!

Will this work on the clutch master cylinder system?

Thank you this really helped me!!!

mine is stuck at google logo for hours

Does anyone know if a 2008 will fit 2014. I know it won't look the best but wondering if it will fit the bed dimensions

So what do i connect key 1 wire to

Great solution using clear tubing for the rain barrel gauge. Thanks!

How many hours will this take total do you think had estimate. Could I do this in 2 nights.

I accidenlty installed it on my hdd, I can't do it anymore ,I had to move it over. Its so dumb. Its like playing Fallout newvegas on the ps3. It so long to load, the game almost feels unplayable. But I'm just spoiled on modern hardware. I used to enjoy videos a 240p cause my Pc coudln't handle 360p or 480p. 720p used to high definition.

Thanks

So glad you made this video. I have that model. Needed to replace rubber door seal. Thank you

SWEET ....

Great video, love that splice technique.

Good video, but too much talking

Thanks I just did that to my tablet I was loosing my mind !!!

what is the ceased part called? the one your ebrake connects to?

My 2011 Chevy Malibu just rolled over 200k yesterday!!!

Bro this is a great video! I bought this pneumatic bleeder last year. I changed both front calipers on my 2013 Honda Fit and man they were so tough to bleed the 2 person old fashioned way. This vacuum bleeder worked awesome.